|
|
Welcome
How to Purchase
Locate a Distributor
Make a Request
Samples
Literature
Comments
Product Information
B-22+ MHS®
B-52+ Aye-Mate®
B-26+ Wing-Mate™
B-53+ Sun-Mate®
B-27+ Sun-Mate®
Exclusive Features
Product Installation
Image Gallery
Packaging Options
B-22 MHS...
B-52+ PLUS...
B-26+ PLUS...
CP5226 Compliance...
SM5327 Sun-Mate®...
Current Brochure
Distributor Info.
Become a Distributor
Need to Know
About ANSI
About SOS
Product Compliance
Product Liability
Program Aids
Statisical Information
Related Links
Affiliations
PPE Training/Guidelines
General Informational
News Links
Website Translation
Français
Italiano
Portuguese
Español
Nederlands
|
|
|
|
Product Installation (printable)
Here is our online representation of our printed instruction booklet. Follow the instructions below as you move through each page.
READ INFORMATION COMPLETELY PRIOR TO USE
|
NOTICE: This SideWear® shield provides LIMITED eye protection. It has been
tested by an independent laboratory and certified compliant to the high velocity
impact requirements of ANSI Z87.1 - 2003 however it will not protect against
all possible eye hazards. This test procedure does not suggest that this product
is indestructible, unbreakable, or impenetrable.
CAUTION: NEVER use this product to protect against severe hazards such as but
not limited to explosives, fragmenting grinding wheels or abrasive discs, molten
metal, lasers, welding, brazing, torch cutting, nail guns, sports activities,
simulated war or paint ball games or similar activities. Use additional appropriate
protective equipment such as face shields. Dress eyewear is not compliant to
Z87 and even when equipped with SOS compliant SideWear® components, this combination
shall not be worn in an industrial work environment. Reference ANSI paragraph
2.3.2 page 9.
WARNING: MAINTENANCE & CARE is important to a continuing level of protection.
Contact with certain chemicals, including those in some sunscreens, bug repellents
and lens cleaners may cause a substantial reduction in impact resistance. To
clean, wash in a mild soap solution and rinse in clean water. Inspect product
prior to each use for pits, scratches, crazing, or discoloration and replace
when any of these conditions exist.
WARRANTY: SOS warrants to purchaser of its SideWear® that these products are
free of defects and material and workmanship for a period of one year from
date of purchase. If the product is found defective in materials or workmanship
and returned to SOS, within the warrant period, it will be replaced. Replacement
constitutes the sole remedy for breach of this warranty. Unless prohibited
by applicable law, Safety Optical Service Disclaims all other expressed or implied
warranties and shall not have any other obligation or liability. This warranty
does not apply to defects or damage from misuse, alteration, use of unapproved
cleaning agents, improper fit on glasses with which the product is used or
use unintended by SOS. In particular, this warranty does not apply to, and
SOS is not responsible for, any defect, damages or loss suffered or incurred
where are universal SideWear® is attached to frames which have not been tested
to the applicable paragraphs of ANSI Z87.1 - 2003.
|
SOS SideWear® Shields have been tested to OSHA 29CFR1910 and ANSI Z87.1-2003
by an INDEPENDENT TESTING LABORATORY and found COMPLIANT.
Patent No. 5,748,278,6,393,609 B1 and others. |
Page 1 | Page 2 | Page 3 | Page 4 | Page 5
|
